Ethernet Unmanaged Switch
āĀ 8-Port PoE.
āĀ Three-mode toggle: Standard, VLAN.
āĀ Maximum PoE output of a single port: 30 W.
āĀ Total power consumption of the switch: 102 W.
āĀ 16 K MAC address table and MAC address auto-learning.
āĀ 8*10/100/1000 Mbps Base-T Ethernet ports (Data/Power).
āĀ 20 Gbps switching fabric for non-blocking line-speed forwarding.
āĀ IEEE 802.3x full duplex flow control and backpressure half duplex flow control.
āĀ 1*10/100/1000 Mbps Base-T Ethernet port (Data), 1*100/1000 Mbps Base-X SFP port.
| Hardware specifications | |
|---|---|
| Standards | IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x, IEEE 802.3af, IEEE 802.3at |
| LED indicators | One Link/Act LED indicator for each port One PoE-MAX LED indicator for each device One Power LED indicator for each device |
| Interfaces | 8 * 10/100/1000 Mbps Base-T Ethernet ports (Data/Power) 1 * 10/100/1000 Mbps Base-T Ethernet port (Data) 1 * 100/1000 Mbps Base-X SFP port |
| Lightning protection | Port: 6kV Power: 6kV |
| Forwarding mode | Store-and-forward |
| Switching capability | 20Gbps |
| Packet forwarding rate | 14.9Mpps |
| MAC address table | 16K |
| PoE Power Supply | IEEE 802.3af/at standards PoE power supply on ports 1-8 Voltage of cores 1, 2, 4, 5 is +, and cores 3, 6, 7, 8 is – |
| Input voltage | 100-240Vļ½ 50/60Hz |
| Dimensions | 177.5 mm x 104 mm x 26 mm(L*W*H) |
| Power Consumption | Total power consumption: <102 W Maximum PoE output: 92 W |
| Three-Mode Toggle | Three-mode toggle through one DIP switch: 1. Standard: Default mode. In this mode, all ports can communicate with each other. 2. VLAN: In this mode, ports 1 – 8 are isolated from each other, but all of them can communicate with port 9 and SFP1. This mode helps isolate DHCP broadcast and reduce broadcast storm. 3. Extend: In this mode, ports 1 – 8 decrease to 10 Mbps in negotiation rate, but transmit up to 250 m in distance. All ports can communicate with each other. |
| Operating environment | Operating temperature: 0Ā°C – 45ā Storage temperature: -40Ā°C – 70Ā°C Operating humidity: (10% – 90%)RH, non-condensing Storage humidity: (5% – 90%)RH, non-condensing |
| Certificates | CCCćFCCćCEćRoHS |
āĀ Compliant with IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x, IEEE 802.3af/at standards.
Reviews
There are no reviews yet.